petit truc pour vos shock de buggy 1/10 de team Associated

par **BEGO** Ven 16 Déc 2011 - 0:37

Some of you may already know this, but I thought I would share a 1:10 shock tip.

We have found that by reducing the sizing of the spacer between the two o-rings, the stock "bright red" o-rings work quite well. The stock spacer that comes with the shocks are 3.6mm. If you use the thick spacer from #6440 the spacer is 3.3mm and the black spacer from #6466 is 3.2mm.

This is definitely something to play around with to reduce the drag on the seals and to allow for more swell. I have been using the 3.3mm spacer, but will be testing the 3.2mm one in the future.

factory team driver