novak ESC Edge

par **Daddydan** Sam 2 Juil 2011 - 9:05

35% plus petit que le gtb2
utilise le meme software
seulement 100$

mais pour des 10.5t et plus (8.5t aurait été mieux selon moi...)

The EDGE 2S Brushless ESC will be available in August 2011.
EDGE 2S BRUSHLESS ESC SPECIFICATIONS
Motor Type …………………………. Sensored Brushless
Fwd/Brk/Rev……………………….. F / B / R
Input Cells ………………………….. 2S Li-Po/Li-Fe or 4-7 NiMH
Size …………………………………… 1.15” x 0.95” x 0.66” (29.0 x 24.3 x 16.8 mm)
Weight (w/o wires) ……………….. 0.69 oz. (19.5 g)
On-Resistance …………………… 0.00057 ohms @ 25°C trans. temp.
Motor Limit …………………………. 540-size: 10.5T and higher
BEC …………………………………… 6.0 volts DC / 2.0 amps
Wire Size ……………………………. 14G Super-Flex Copper-Strand Silicone Wire
Status LEDs ………………………. 5
EDGE 2S BRUSHLESS ESC FEATURES
Affordable performance, compact and lightweight design
Multiple adjustable parameters via on-board programming: Minimum Brake (0-30%), Drag Brake (0-30%), Minimum Drive (0-15%), Dead Band (2-8%), Throttle Curve (Linear/Expo), Brake Curve (Linear/Expo), Brake Frequency (1.67-13.7 KHz), Brake End Point (10-100%), Drive Frequency (16-7 KHz), Motor Rotation, Reverse, and Voltage Cut-Off
User-friendly One-Touch programming interface with five colored status LEDs to help personalize the speed control’s feel and response
Ideal for all 1/10th and 1/12th applications including 2WD Short Course, Off-Road and On-Road
Zero motor timing advance—meets ROAR Sportsman Class guidelines
Compatible with all ROAR-legal sensored 540 motors 10.5T and higher
Factory wired with battery (Traxxas®/#1850, Tamiya®-style/#1851) and gold-plated Bullet motor plugs for “Plug-and-Play” operation
Built-in diagnostic temperature monitoring that lets you quickly check the ESC’s operating temperature at any time
On-board Hall Sensor Test to easily and quickly verify that the motor’s sensors are working properly
NovaBrakes™ provide smooth, controlled and powerful brakes under any condition
Sensor-based for excellent torque and low-speed driveability
Water-resistant case with a silicone gasket case to help keep the elements out
Thermal Overload Protection circuitry to protect the ESC from overheating
Built-in Voltage Cut-Off circuitry prevents damage to LiPo/LiFe batteries
Meets RoHS compliance and includes 120-Day Warranty
Designed, assembled and tested by Novak in Irvine, Calif., using globally sourced components
#1850 EDGE 2S Brushless ESC – Traxxas®/Bullet
#1851 EDGE 2S Brushless ESC – Tamiya®/Bulle

[Vous devez être inscrit et connecté pour voir cette image]