Une machinerie Scale (beaucoup de photos)

Pour ceux qui ont trippé sur la pelle mécanique de RC Sparks.... Voici la nouvelle bébelle de Rc4WD 30 pouces de long 75 lbs


Earth Mover 870K is the most powerful wheel loader available today, created for the customer who requires reliability and high production in bulk earth moving or construction projects. CNC machined metal parts, fully assembled, ready to work! Massive power through 350kV brushless system.





Important Note: Due to the size of this Excavator, this product has to be shipped by it self. And it will be only shipped by UPS Global Air (5-8 days), there is also an extra shipping surcharge of $450 to ship anywhere in the US and all international countries due to the size and weight. (actual shipping weight is 45kg/100lbs)Payment Information: Due to the value of this product, all customer must pay with bank transfer. When you check out, do not choose credit card or paypal, we will refund you. Make sure choose bank transfer instead. Feel free to email us if you have any questions.


Important Note: This product is for experienced R/C users. Not recommended if you just started with R/C.



Specification:

• CNC machined aluminum parts
  
• Molded steel bucket
  
• 6 channel 2.4Ghz radio
  
• High Intensity Light (Super bright) (X Watt)
  
• Optimized steel hydraulic system
  
• Scale operator station (can fit a driving figure)
  
• Massive 29.5-25L-5 tires
  
• Reliable hydraulic valve and adjustable pump
  
• Heavy duty hoses (OD 4.5mm Nylon, ID 2.5mm)
  
• Powder coated in yellow
  
• Brushless system (hydraulic)
  
• 40A brushless ESC with BEC
  
• XXX Kv brushless monster torque motor
  
• Realistic non functional disk break
  
• Scale ABC plastic interior
  
• Wheel with planetary gearbox build-in
  
• 2 speed full metal transmission (1:16 and 1:4 gear ratio)
  
• Realistic fullfull metal axles
  
• Run time is: XX minutes (XXXXmAh battery)
  
• Steel machined oil pump (45mm X 30mm X 15.5mm)
  
• Bucket capacity:
  
• Maximum bucket force: 70kg/154pounds
  
• Driving speed: XXX meter per hour
  
• Scale: 1:12
  
• Length: 741mm/29inch
  
• Width: 276mm/11inch
  
• Height: 276mm/11inch
  
• Maximum bucket height: 461mm/18inch
  
• Maximum bucket up and down angle: 46 to 64 degrees
  
• Maximum bucket left and right angle: 38 degrees
  
• Wheel base: 284mm
  
• Deadweight: 20.5kg/45lbs
  
• Total mass load: 32kg/70lbs
  
• Operating oil pressure: 20Bar, 290psi
  
• Manufactured by JDCustoms
  
• 30 days limited warranty
  

What's included:

• 1/12 Scale Earth Mover 870K Hydraulic Wheel Loader
  

​


Additional parts needed:
- Lipo Charger (Part # Z-E0037)
- 3S 6500mAh 11.1v 20c Lipo battery (Max size: 73mm X 80mm X 132mm) (Part # Z-E0038)
- ESC support bullet connector
- RC4WD standard hydraulic oil (part # VVV-S0014)
- Shell Tellus S2 V15 Hydraulic Oil (part # VVV-S0109)
- Mobile DTE22 V22 Hydraulic Oil (part # VVV-S0111)


Optional upgrade:
- Scale Heavy Duty Flat Bed Transporter



Warranty information

This product is made for heavy duty usage. Since there is no plastic parts, its designed to last. But hydraulic pump, hoses and electronics system can break over time. Do not let the system overheat during usage. We will have all spare parts available for sell. Pump, hoses are electronics system is not covered under warranty, but we do guarantee fully functional at arrival. Each unit is full tested twice before we ship.
Each unit is professionally assembled, adjusted and tested. Do not adjust the oil pressure switch. Oil pressure will drop as you operate over time.

ouf wow et le prix est de combien

Ca cé plus que du Tonka, cé BIG

 3300+$

Tout est en métal machiné. Rien de plastique et tout les cylindre sont vraiment hydrolique...
c'est 3300$ + 450$ de shipping... (une fois emballé il pèse 100 lbs)
c'est du pro pour les poche pleine  

J'en veux un !
Phil, tu ne peux pas avoir un deal...

danbillyboo a écrit:J'en veux un !
Phil, tu ne peux pas avoir un deal...

y rentre tu dans ton Tucson? Faudra être deux pour l'embarqué dedans.  

mais j'ai un trailler. Je pense être correct...

pour faire les piste de scale! ca prend ca lol